Construction works

Fences, gates and metalwork

Made-to-measure metal fences and gates — for gardens, residential and commercial buildings, industrial complexes and production sites. Plus doors, canopies and air-conditioner covers, fabricated in our plant and installed on site.

Fabrication
Made to measure
Material
Steel
For buildings
Residential and commercial
Installation
Our own crews
Dark metal gate with vertical bars set into a stone wall next to an old stone house
Metal gate in a stone wall

What we do

Made-to-measure metal, from a single gate to a whole building.

Fences, gates and canopies are what you see first on a building, and what lasts longest. That is why we measure them on site, fabricate them in our own plant and install them ourselves — so they fit the opening, not a catalogue. We pay particular attention to welded joints, geometry and the final protective finish of the metal.

For residential and commercial buildings we make series of railings for all the balconies and terraces, and for houses individual gates, doors and canopies. For fencing gardens and plots there is also a lighter, cheaper option — composite fencing mesh, which needs no painting.

  1. Balcony and staircase railings

    Steel railings for balconies, terraces and staircases in residential and commercial buildings — a made-to-measure series, with the handrail and infill of your choice.

  2. Fences for gardens and complexes

    Fences for gardens, industrial complexes and production sites — to the dimensions, the design and the look you want.

  3. Pedestrian and vehicle gates

    Pedestrian and vehicle gates and metal doors, made to fit the opening and the style of the building.

  4. Canopies

    Canopies for terraces, entrances and parking spaces — structure and roofing.

  5. Air-conditioner covers

    Metal covers that hide the outdoor units of air conditioners and blend them into the facade.

  6. Small metalwork

    Handrails, grilles, covers and other made-to-measure metal elements — everything needed to complete a fence or a gate.

How we work

Measured on site, made in our plant

The design can follow the building's existing elements — send us a photo of what needs to match.

  1. 01

    Measuring

    A site visit and exact measurements of every opening, balcony and staircase.

  2. 02

    Proposal and quote

    Design, infill, finish, price and completion time.

  3. 03

    Fabrication

    Cutting, bending and welding in our own plant, with checks on joints and geometry.

  4. 04

    Protection

    Surface treatment and a final protective finish for the metal — powder coating if needed.

  5. 05

    Installation

    Installation on site and handover.

Our work

Fences, canopies and gates

Residential buildings, houses and gardens in Montenegro. Click a photo to enlarge.

Dark steel railings on the balconies of a multi-storey residential building
Residential buildingSteel balcony railings on every floor.
Metal canopy over a terrace with a table and chairs next to a stone house
Canopy over a terraceA metal structure with roofing, next to a stone house.
Worker in a protective mask finishing a joint of a metal railing during installation, with blue sky behind
Installation on siteFinishing the joints of a railing on site.
Facade of a residential building with a row of metal railings on the balconies
Facade with balconiesA series of railings made to measure for each balcony.
Indoor black metal staircase railing with decorative infill
Staircase railingAn indoor railing with decorative infill.
Steel balcony railings on the corner of a residential building, seen from below
Building cornerSteel balcony railings, seen from below.

Frequently asked questions

Before you send an enquiry

Do you make fences to measure?

Yes — everything is measured on site and made for the exact opening, balcony or staircase. The design can follow the building's existing elements.

Can you do the railings for a whole building?

Yes. For residential and commercial buildings we make series of railings for all the balconies and terraces, installed floor by floor on a schedule coordinated with the other facade works.

Do you do powder coating?

Yes, if needed. Every element gets surface treatment and a final protective finish, and powder coating is agreed with the quote.

What do you need for a quote?

Photos of where it will be installed, approximate dimensions and an idea of the design. We take exact measurements during a site visit, before fabrication.