Construction works
Sandwich panels and sheet metal work
Substructure and installation of sandwich panels for roofs, facades and walls, flashings and made-to-measure sheet metal components — for new and existing industrial, commercial and storage buildings. Roof and facade from one contractor, with no need to coordinate several contractors on the same building.
- Panels
- Roof, facade, walls
- Substructure
- Steel, made by us
- Sheet metal work
- Flashings and sheet metal components
- Buildings
- New and existing
What we do
A building envelope that keeps the weather out.
A sandwich panel is roof, wall and thermal insulation in one element. But whether a building leaks and loses heat is decided by the joints — the substructure, flashings and sheet metal work. That is why we do them ourselves, together with the panels.
Most often we install panels on steel structures we have fabricated ourselves, but we also work on existing buildings — including removing worn-out panels and installing new ones.
-
Roof sandwich panels
Roof and thermal insulation in a single layer — for industrial halls, warehouses, workshops and commercial buildings.
-
Wall sandwich panels
A fast, clean facade for industrial and commercial buildings, in the colour and layout of the design.
-
Substructure
The steel substructure the panels are fixed to — we make it ourselves, so there is no waiting between two contractors.
-
Flashings
Corners, ridges, windows, doors and wall junctions — the details that decide whether the roof and facade let water in.
-
Sheet metal work
Fabrication and installation of sheet metal components to the building's dimensions and needs.
-
Panel replacement
Removing worn-out or damaged panels and installing new ones.
How we work
From measuring to the last flashing
We choose the panel thickness and type according to the building's use and how much it is heated or cooled — our recommendation comes with the quote.
-
01
Measuring
A site visit or work to the design — dimensions of the roof, facade and openings.
-
02
Quote
Panel type and thickness, colour, flashing details, price and completion time.
-
03
Substructure
Fabrication and installation of the steel substructure, if the building doesn't have one.
-
04
Panel installation
Roof and wall panels, with sealed joints.
-
05
Flashings and sheet metal work
Flashings, sheet metal components and finishing details — and handover of the building.
From the site
Replacing worn-out panels
On older buildings the panels often let water in at the joints or no longer insulate. We remove the old ones, check the substructure and install new panels — with new flashings.
- Removal and disposal of worn-out panels
- Checking and supplementing the substructure
- Installation of new roof and wall panels
- New flashings and sheet metal components
Frequently asked questions
Before you send an enquiry
Which panel thickness should I choose?
It depends on the building's use and how much you heat or cool it. A thinner panel is enough for an unheated warehouse; a production plant, cold store or offices need a thicker one. Our recommendation comes with the quote.
Do you also do the structure?
Yes — both the load-bearing steel structure and the substructure for the panels. If the building already exists, we check whether the existing structure can take the panels.
What do you need for a quote?
The roof and facade dimensions or the design, the panel type if it has already been chosen, and the building's location. Photos of the current condition help with replacements.
A roof or facade for your building?
Send us the dimensions or the design and a few photos of the building. We'll reply with a panel proposal, a price and an installation time.
Seven services — one contractor